Assuming you're still using a stock fuel pressure regulator that's not overrun, you'll find that -32% correction at idle is too much correction, and a good idle might be around -22%.Enter this correction value into the airflow adjustment map. For example my RC550 injectors would give a correction value of -0.32, multiply this by 100% and get -32%. Use the forumula (370/new injectors) - 1. Instead we need to calculate the correction factor ourselves. Any values you enter here are ignored because this is for stage 3 only. Don't make the mistake of using the I/J menu.With the engine off, just push the throttle all the way down and emanage will automatically fill in the settings for you for MIN and MAX. Click on Throttle tab and define MIN and MAX settings.
![greddy emanage blue installation manual greddy emanage blue installation manual](https://29015-70422-1-raikfcquaxqncofqfm.stackpathdns.com/33767-thickbox_default/boomslang-greddy-e-manage-blue-pnp-harness.jpg)
Click on Map Select tab and pick Airflow Adjustment map.Click on Vehicle tab, and select 6G72 engine code.
![greddy emanage blue installation manual greddy emanage blue installation manual](http://forums.photographyreview.com/attachments/help-files/28984d1151834585-nikon-f6-metering-issues-24520002-matrix-metering.jpg)
![greddy emanage blue installation manual greddy emanage blue installation manual](https://www.kenrockwell.com/nikon/f6/images/KEN_5643-front-1200.jpg)
Run software and Click on Parameter Settings (little blue car icon).